If you have a prepayment meter, first check that you have sufficient credit on the meter.
If you have a standard meter and your property has lost power, check your fuse box:
- If the trip switch is in the 'off' position, try switching it back on. If it won't stay on, you have a fault with your wiring, an appliance or the fuse box. Try switching off appliances that are using an electricity supply one by one until you identify the cause of the problem. If you still don't have power, you may need to call an electrician.
- If the trip switch is in the 'on' position, try turning it off and back on again. This safety feature may have been triggered without the switch physically moving and this may reset it.
- If the supply isn’t restored, push the ‘test’ button. If the switch trips, you’ve probably got a problem with your wiring or an appliance. This is because the ‘push to test’ button can only trip the switch if your local network operator’s supply is healthy. The trip will now be in the ‘off’ position.
- If the trip switch is on and the ‘push to test’ button does not trip the switch, then there is no electricity coming into the property.
If you've completed the above checks call 105, this is the national power cut line.
If your local network distributor has confirmed that there aren't any supply issues in your area, you should next check your meter for any error messages. If any error messages are present, contact us with the code and we can advise how to proceed.